Tag Archives: ets

Bandsaw Blade Tooth Set

The bending out of the blade’s teeth, left or right, and away from the blade is known as tooth set. It works to give a straighter cut. Tooth set clears the chips from the kerf, allowing the band back to clear the cut without binding or becoming stuck in the material. The set will vary depending on the intended cut. A rip saw has a tooth set similar to the angle used on a chisel, ripping the material apart. A flush-cut saw has no set on one side, allowing the saw to be laid out flat onto a surface and cut without scratching. The set of a blade’s teeth …

Continue reading

Tagged , , , , , , , , , , , , , , , | No comments yet | Bet the first to leave a comment